Cerberus Three Headed Hellhound Greek Myth
Taxes and shipping calculated at checkout.
- Size
- 5.6 in x 7.2 in x 7.1 in
- Material
- Plastic
- Included
- One 3D printed piece in the type and finish you select
- Not included
- Books, shelving and props shown in photographs
- Made
- Printed to order in New Jersey
CERBERUS, THREE HEADED HELLHOUND
Design by Deadmoon Designs
The guardian of the underworld, braced low and snarling on all four legs. Three separately sculpted heads, the outer two thrown wide with jaws open and fangs bared, the center one locked forward at the viewer. Every head carries its own muzzle wrinkles, brow, and ear set, so none of them are copies.
The body is worked over with directional fur strokes and defined musculature down the shoulders, chest, and haunches, and it holds detail right out to the individual toes. This is the most heavily sculpted piece in the range and it earns its place as a centerpiece rather than a shelf filler.
SIZE
- 7.2 in wide across the heads (18.2 cm)
- 7.1 in front to back (18.1 cm)
- 5.6 in tall (14.3 cm)
WHAT YOU GET
- One printed Cerberus statue
- Printed as a single piece. No assembly, no glue, no hardware
- Single color PLA, matte finish, 0.2 mm layers
ABOUT THE PRINT
A model this heavily undercut requires supports under the jaws, chest, and legs. Supports are removed and the contact points cleaned up before it ships, but faint witness marks can remain on the underside, between the legs, and inside the open mouths. The upward and outward facing display surfaces are clean.
Takes a dark wash extremely well if you want to bring out the fur and muzzle detail yourself.
Not watertight and not food safe. Clean with a damp cloth. Keep out of direct sun and hot cars, PLA softens with heat.
Books and props shown in the photos are for scale only and are NOT included.
Fan-made and printed in-house by an independent maker. Design licensed from Deadmoon Designs. Not official merchandise.
Made to order and packed protected.